Tuesday 3 September 2013

The Terminator custom stainless steel electric guitar and illuminating case!

guitarz.blogspot.com:
It's probably easiest if I just quote liberally from the eBay listing for this particular custom guitar:
Nicknamed "The Terminator", this is a RAM-JAM Music one-of-a-kind. You'll be the envy of all other with this baby! This custom 100% 316 stainless steel guitar and all stainless steel body has 2 necks, one with stainless steel frets, and one fretless. It also had custom turned stainless steel knobs and a kick ass design and case. This guitar plays and sounds as awesome as it looks. Like the stainless steel lightening bolt handle on the case, this guitar has power! With its 1/4" solid stainless steel neck, this guitar feels like no other. The fretless is 3/8 of an inch thick and is slightly scaled down for a lighter weight. You can play all the way up to its double coil stack pick up, when you run out of frets, play the fretless area and if you like the feel of that, change the neck to the 100% stainless steel all fretless neck with adjustable height nut. For a rugged sound, use the same strings. For a smoother sound change to the flat wound strings. For slide guitar without the noise of the slide hitting the neck, simply adjust the screws behind the nut to raise strings up to 3/8 above the fretless neck. It has a Schaller bridge, new 1987 Seymour Duncan Hot Stack Pick-up, O.E.M. tuning pegs, .010-.046 strings, and a set of flat wound .013-.056 strings for the fretless neck.

The case body is made of aluminum mesh with a diamond plate aluminum bottom for light weight yet rugged look and can be hung on the wall as a display case. The top is made of aluminum mesh with an aluminum angle frame. The whole case is polished to a mirror finish and reflects like it's alive. The EL neon light runs on 2 AA batteries and has 2 settings of flashings and one setting of solid light. The Terminator is held captive in its display case with a single lighting bolt handled shackle strapped down tightly on its rubber lifters which hold it in the center of the case! The custom illuminating case has a white fuzzy bottom with a custom made box to store a slide and picks or a pack of smokes! The strap is made of an army green braided 1970s robot main frame computer wire, tough yet comfortable, and is the lifeline of The Terminator.

Now with 3 necks! One ultimate 32 slim frets, one 22 Jumbo fret, the super fretless!

If you like the pictures, you are going to love the real thing!

"The Terminator" was created by Ram-Jam Music
Quite astonishing, I think you'll agree. And it could be yours if you can afford the $8,000 Buy It Now fee on eBay.

Thanks to Joe from Stratoblogster for brining this guitar to my attention.

G L Wilson

© 2013, Guitarz - The Original Guitar Blog - the blog that goes all the way to 11!
Please read our photo and content policy.

6 comments:

  1. Whoa.

    It's pointy, which is totally metal.

    But it's also made out of metal, so it's... meta-metal?

    ReplyDelete
  2. Dang. With all that metal, the only thing "lightening" [sic] will be your wallet.

    ReplyDelete
  3. What a nasty, dangerous,ugly thing. You'll put your eye out kid.

    ReplyDelete
  4. Give me the right tools and I can build the same one for less than 400€. I agree to pay for originality but too much is too much; 8000 dollars for such an instrument is definitely out of space. If people want to buy such instruments just as some buy artworks it's ok but it makes all the REAL guitar prices to go up and it will be eventually a problem for all of us...

    ReplyDelete
  5. How heavy is it? I struggle to play a les Paul because it kills my shoulder lol

    ReplyDelete
  6. Nice post.
    here valuable information.
    Thanks for sharing with us.
    Steel guitar case

    ReplyDelete

LinkWithin

Related Posts with Thumbnails

ShareThis